!

Carom Classic 4-tlg 140cm 12mm

1001276

Carom cue in the traditional design of the 80s. The 3-section part of the forearm is equipped with differently heavy weight rings for replacement and individual adaptation to the respective discipline. The plain grained wood of the cue butt, in conjunction with the 4-prong spliced upper part is professionally glued together to the Canadian maple forearm. The cue butt is polished and sealed to protect it against scratches.
The conical shaft made from Canadian maple with wooden screw joint, ivory colored 10 mm short ferrule, Ø 12 mm is only natural sanded and polished with a smooth finish, equipped with a medium-hard Le-Pro leather tip. Due to the variation possibilities lies the cue lies perfectly in the hand with a balanced balance point. The ivory-colored butt plate  has a black trim ring and a replaceable impact rubber
Standard length 140 cm (55 ") Weight about 20 ounces.

Carom Classic 2-tlg 140cm 12mm

1001280

Carom cue in the traditional design of the 80s, suitable for all disciplines.
The shaft made from Canadian maple with wooden screw joint, ivory colored short 10 mm nylon ferrule, Ø 12 mm, equipped with a medium hard Le-Pro leather tip. The spliced brown stained forearm with colored red and green real veneers, gives this cue a beautiful look. At the bottom part is a elaborate ornament engraved, consisting of five round mother-of-pearl buttons (imitations) embedded. To protect the cue butt against scratches the surface of the cue is polished and sealed. The conical Canadian maple shaft is only natural sanded with a smooth finish for a perfect feeling and ball control. The ivory colored plastic end piece has a replaceable impact rubber.
Standard length 140 cm (55 ") weight about 19 ounces

Carom Classic 2-tlg 140cm 12mm

1001281

Carom cue in the traditional design of the 80s, suitable for all disciplines.
The shaft made from Canadian maple with wooden screw joint, ivory colored short 10 mm nylon ferrule, Ø 12 mm, equipped with a medium hard Le-Pro leather tip. For the forearm, 2 varieties of selected plain woods were selected, spliced and carefully glued. The handle is decorated with 4 round mother-of-pearl inlays (imitations) in the lower handle area and above, bounded by two circumferential milled decorative rings, bordering the grip area with traditionally milled diamond patterns above and below. To protect the cue butt against scratches, the surface is polished and sealed.The conical Canadian maple shaft is only natural sanded with a smooth finish for a perfect feeling and ball control. The ivory colored bottom plate has a replaceable impact rubber.
Standard length 140 cm (55 ") weight about 19 ounces

Carom Classic 2-tlg 140cm 12mm

1001285
Carom cue in the traditional design of the 80s, suitable for all disciplines.
The shaft made from Canadian maple with wooden screw joint, ivory colored 10 mm short nylon ferrule, Ø 12 mm, equipped with a medium hard Le-Pro leather tip.
The forearm impresses with its simple and unobtrusive appearance. Dark stained wood with a very vivid grain is interlocked and glued together with Canadian maple wood for the upper part of the butt.
The surface of the forearm is polished and sealed to protect against scratches. The conical Canadian maple shaft is only natural sanded with a smooth finish for a perfect feeling and ball control. The ivory colored bottom plate has a replaceable impact rubber.
Standard length 140 cm (55 ") Weight about 20 ounces

Carom Classic 2-tlg 140cm 12mm

1001290
Carom cue in the traditional design of the 80s, suitable for all disciplines.
The lower part convinces with its simple and unobtrusive appearance. Selected light wood, masterfully crafted from one piece of exotic wood. The cue  fits well in the hand in fact of the neutral balance point. The conical shaft is made from selected Canadian maple with wooden screw joint The conical shaft made from Canadian maple with wooden screw joint, ivory colored 10 mm short ferrule, Ø 12 mm is only natural sanded and polished with a smooth finish, equipped with a medium-hard Le-Pro leather tip. The simple black plastic bottom plate has a replaceable impact rubber.
Standard length 140 cm (55 ") Weight about 20 ounces

Carom Classic 4-tlg 140cm 12mm

1001116
Carom cue in the traditional design of the 80s. The 3-part lower handle is equipped with differently heavy weight rings for replacement and individual adaptation to the respective discipline. The wood of the forearm is sealed and polished. The maple shaft with wooden screw joint has a polished and natural finish. The grip area has a milled surrounding diamond pattern with ornaments. The butt end contains five traditional mother-of-pearl inserts (imitations). The ivory colored butt plate has a replaceable impact rubber buffer.
Standard length 140 cm (55 ") Weight about 540 grams (19 oz)

Carom Classic 2-tlg 140cm 12mm

1001214
Carom cue in the traditional design of the 80s, suitable for all disciplines. For the forearm selected plain wood was chosen, each decorated with 4 circular mother-of-pearl inlays (imitations) in the upper, and lower grip area, interrupted by an ivory-colored trim ring. The wood of the forearm  is sealed and polished. The maple shaft with wooden screw joint is polished and has natural finish. The grip area has a milled surrounding diamond pattern with ornaments. The butt end contains four traditional mother-of-pearl inserts (imitations). The ivory colored plastic butt plate has a replaceable impact rubber bumper.
Standard length 140 cm (55 ") Weight about 540 grams (19 oz)

Carom Classic 3-tlg 140cm 12mm

1001220
Carom cue in the traditional design of the 80s, suitable for all disciplines.
Shaft with wooden screw joint, ivory colored short 10 mm nylon ferrule, Ø 12mm. For the two-part base, two beautifully grained wood species were glued together, decorated with four round mother-of-pearl inlays (imitations) above the grip area, as well as in the butt end. The screws to adjust the weight are framed by ivory colored trim rings. The wood of the cue butt is sealed and polished. The maple shaft is only sanded  and natural. Several groups of milled circumferential decorative grooves give the cue an elegant look. The ivory colored plastic bottom plate has a replaceable impact rubber bumper.
Standard length 140 cm (55 ") weight about 540 grams

Carom Classic 2-tlg 140cm 12mm

1001231
Carom cue in the traditional design of the 80s, suitable for all disciplines.
Shaft with wooden screw joint, ivory colored short 10 mm nylon ferrule, Ø 12 mm. The cue butt is made from various richly grained woods, interspersed with combined ivory and black trim rings. A discreetly engraved ornament into the cue butt, together with the 10 round decors from mother of pearl inlays (imitations), decorate the lower cue butt. The smooth polished and sealed grip lies perfectly in the hand. The maple shaft is polished and natural sanded only. The ivory colored  bottom plate from nylon has a replaceable impact rubber bumper.
Standard length 140 cm (55 ") weight about 510 grams

Carom Classic 2-tlg 140cm 12mm

1001235
Carom cue in the traditional design of the 80s, suitable for all disciplines.
Top with wood screwed connection, ivory colored short 10 mm nylon ferrule, Ø 12 mm. The lower part consists of 3 harmoniously coordinated dark woods. The simple design of the wood gives the cue a noble appearance, combined with discreetly inlaid black inlays; in the upper area as well as in the tail. The beautifully grained smooth polished handle is framed by 3 milled grooves. The surface is sealed for protection against scratches. The maple top is polished and natural. The tail also has four black inlays as an ornament. The ivory colored plastic end piece has a replaceable impact rubber.
Standard length 140 cm (55 ") weight about 510 grams

Carom Classic 2-tlg 140cm 12mm

1001239

Carom cue in the traditional design of the 80s, suitable for all disciplines.
The shaft, made from selected Canadian maple with wooden screw joint, ivory colored short 10 mm nylon ferrule, Ø 12 mm. The cue butt impresses with its simple and unobtrusive appearance. Light wood, harmoniously coordinated with each other, decorated with small black inlays above and below the grip area. Into the forearm is engraved a beautiful circumferential diamond pattern, bordered by 2 circumferential grooves. The surface of the cue butt is sealed for protection against scratches. The maple shaft  is sanded only and natural. The ivory colored plastic bottom plate has a replaceable impact rubber bunmper.
Standard length 140 cm (55 ") weight about 510 grams

Carom Classic 2-tlg 140cm 12mm

1001275

Carom cue in the traditional design of the 80s, suitable for all disciplines.
The shaft, made from Canadian maple, with wooden screw joint, ivory colored 10 mm short nylon ferrule, Ø 12 mm, equipped with medium hard Le’ Pro leather tip. The Forearm is designed with its turquoise colored real decorative veneers, 4-prong spliced of dark stained precious wood, pointed towards the joint screw. The colors harmonize beautifully with each other and at the same time give the cue a serious and elegant look, combined with the discreetly contrasting black ring on the bottom plate. The wooden handle of the cue is polished and sealed. The conical Canadian maple shaft is only natural sanded with a smooth finish for a perfect feeling and ball control.
The ivory colored bottom plate has a replaceable impact rubber.
Standard length 140 cm (55 ") weight about 19 ounces

Schaft Carom-W-Ahorn 68cm 11mm

1001101

Replace Cue shaft with wooden screw joint, short ivory colored 10 mm nylon ferrule, Ø 11 mm leather medium hard, made from selected Canadian maple wood. The conical cut ensures a minimum of deflection.
(Suitable for Marathon® Carom Classic-Line)

Schaft Carom-W-Ahorn 68cm 12mm

1001102

Replace Cue shaft with wooden screw joint, short ivory colored 10 mm nylon ferrule, Ø 12 mm leather medium hard, made from selected Canadian maple wood. The conical cut ensures a minimum of deflection.
Suitable for Marathon® Carom Classic-Line)

Schaft Carom-W-Ahorn 72cm 12mm

1001103

Replace Cue shaft with wooden screw joint, short ivory colored 10 mm nylon ferrule, Ø 12 mm leather medium hard, made from selected Canadian maple wood. The conical cut ensures a minimum of deflection.
(Suitable for Marathon® Carom Classic-Line)